Skip to contentOceanToken

How much does the DeepSeek V4.1 Flash API cost?

On OceanToken, DeepSeek V4.1 Flash costs $0.21 per 1M input tokens and $0.84 per 1M output tokens at Tier 1 (30% off the official price) and $0.165 per 1M input tokens and $0.66 per 1M output tokens at Tier 3: 45% off DeepSeek’s official price of $0.30 input / $1.20 output. Cached input bills at the official $0.006 per 1M tokens at every tier. One request with 100K input and 20K output tokens costs $0.0378 at Tier 1 and $0.0297 at Tier 3, against $0.054 at the official price.

DeepSeek V4.1 Flash API price: official vs OceanToken
per 1M tokensOfficial priceTier 1Tier 2Tier 3
Input$0.30$0.21 −30%$0.195 −35%$0.165 −45%
Output$1.20$0.84 −30%$0.78 −35%$0.66 −45%
Cached inputOfficial price at every tier$0.006$0.006$0.006$0.006

Prices as of November 18, 2026.

Get API Key DeepSeek V4.1 Flash model page

What does a typical request cost?

Tier 1 is below $1,000 in cumulative top-ups, Tier 2 starts at $1,000 and Tier 3 at $10,000. Gifts and credit grants count toward the total. Your account moves up on its own, and every later request bills at the lower rate.

Example: 100K input + 20K output tokens
WorkloadOfficial priceTier 1Tier 2Tier 3
One request$0.054$0.0378 −30%$0.0351 −35%$0.0297 −45%
1,000 requests$54.00$37.80 −30%$35.10 −35%$29.70 −45%

How to pay the least for DeepSeek V4.1 Flash

Three things set what a DeepSeek V4.1 Flash request costs on OceanToken: your tier, how much the model thinks, and how much of the input comes from the cache. Each effect below is worked out from the prices on this page.

LeverWhat to doEffect on the bill
Your tierTier 3 starts at $10,000 in cumulative top-ups; gifts and credit grants count toward it, and the account moves up on its own.$0.165 input / $0.66 output per 1M, −45% against DeepSeek's $0.30 / $1.20
Less thinkingSend reasoning_effort: "low" and leave room in max_tokens: reasoning tokens bill as output.−36% per answer in our own test of November 14, 2026 (2,452 output tokens instead of 3,858)
Cached inputRepeated input read from the cache bills at DeepSeek's own cache price, the same at every tier.$0.006 per 1M, −97% against Tier 1 input at $0.21

The thinking test in full, with code

How fast is DeepSeek V4.1 Flash? Measured on our API

Measured on the OceanToken API on November 16, 2026: the median of 3 streaming runs per model, one short prompt, up to 150 output tokens. Longer prompts and outputs take longer.

ModelTime to first tokenOutput speed
deepseek-v4.1-flash0.93 s108 tokens/s
DeepSeek V4 Pro1.59 s52 tokens/s

Source: OceanToken /speed, measured November 16, 2026. Every measured model

Large volume? Enterprise rates are by quote, up to 60% off. Quote by email

Frequently asked questions

How much does the DeepSeek V4.1 Flash API cost per million tokens, and where can I get it cheaper than the official price?

DeepSeek V4.1 Flash costs $0.30 per 1M input tokens and $1.20 per 1M output tokens at DeepSeek’s official price. On OceanToken it costs $0.21 input and $0.84 output at Tier 1 (30% off) and $0.165 / $0.66 at Tier 3 (45% off). Cached input bills at the official $0.006 per 1M tokens. You call the same model with one OpenAI-compatible API key.

DeepSeek V4.1 Flash vs DeepSeek V4 Pro: which should I use?

At Tier 1 on OceanToken, DeepSeek V4.1 Flash costs $0.21 input / $0.84 output per 1M tokens and DeepSeek V4 Pro costs $1.056 / $3.168. A request with 100K input and 20K output tokens costs $0.0378 on DeepSeek V4.1 Flash and $0.169 on DeepSeek V4 Pro. Start with the one that costs less and switch only if the other does better on your own tests; both take the same API key, so switching is a change of model ID.

Is cached input discounted on DeepSeek V4.1 Flash?

No. Cached input bills at DeepSeek’s official price at every tier: $0.006 per 1M tokens for DeepSeek V4.1 Flash. The discounts apply to input and output.

How do I get the Tier 3 price?

Top up more. Tier 1 is below $1,000 in cumulative top-ups, Tier 2 starts at $1,000 and Tier 3 at $10,000. Gifts and credit grants count toward the total. Your account moves up on its own, and the console shows the rate that applies to you.

Am I charged for failed requests?

No. If a request fails, you are not charged: that covers a request refused for an insufficient balance or by a safety check, one whose provider fails before returning any output, and a video job that fails or is refused by a safety check, whose held amount goes back to your balance. The one exception: if a request breaks off after the model has started producing output, for example a stream cut off part-way, you pay for the tokens that were processed and generated for it.

Is there a volume discount?

Yes. Enterprise rates are by quote, up to 60% off: ask for a quote by email on the Enterprise page and we activate your rate for you.

Is it the official DeepSeek V4.1 Flash model?

Yes. You call DeepSeek’s DeepSeek V4.1 Flash by its model ID, deepseek/deepseek-v4.1-flash, and get that model. The price table shows the official price next to ours.

Do I need a subscription to use DeepSeek V4.1 Flash?

No. You add credits by card, and each request is billed at the model’s price. Purchased credits are valid for 12 months.

How do I call the DeepSeek V4.1 Flash API?

Create an API key in the OceanToken console, set the base URL to https://api.oceantoken.ai/v1 and use the model id, for example deepseek/deepseek-v4.1-flash. The OpenAI SDKs and any OpenAI-compatible client work.

Python
from openai import OpenAI
# Your API Key from the OceanToken console
client = OpenAI(base_url="https://api.oceantoken.ai/v1",
                api_key="YOUR_API_KEY")
reply = client.chat.completions.create(
    model="deepseek/deepseek-v4.1-flash",
    messages=[{"role": "user", "content": "Hello"}])
print(reply.choices[0].message.content)
curl
# Your API Key from the OceanToken console
curl https://api.oceantoken.ai/v1/chat/completions \
  -H "Authorization: Bearer YOUR_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{"model": "deepseek/deepseek-v4.1-flash",
       "messages": [{"role": "user", "content": "Hello"}]}'

Get API Key All models

DeepSeek API: every DeepSeek model and tier

Keep exploring

DeepSeek V4.1 Flash model page · DeepSeek API · All model prices

DeepSeek V4.1 Flash vs Gemini 3.5 Flash · DeepSeek V4.1 Flash vs Qwen3.8 Flash · DeepSeek V4.1 Flash vs MiniMax M3 · DeepSeek V4.1 Flash vs Claude Opus 5.5 · DeepSeek V4.1 Flash vs Claude Fable 5.2 · DeepSeek V4.1 Flash vs Claude Fable 5.1 · All comparisons

Claude Sonnet 5.5 API price · Claude Opus 5.5 API price · GPT-5.5 API price · GPT-6 Sol API price · Gemini 3.1 Pro API price · Seedance 2.5 API price · MiniMax H3 API price · Kling v3.0 API price